Cooking Timer" Function; Preliminary Indications; Set The Cooking Timer - GGM gastro POP434E Mode D'emploi

To set the power supplied to the bottom element of the oven,
operate as follows:
26. Ensure that the appliance is not off and that no other
procedures are in progress.
27. Press and release two times the "BOTTOM" element
key: the LED
the top of the display will flash the power value.
28. Press and release the "INCREASE" key or the
"DECREASE" key within 15 s to set the power value;
the c0 and c1 parameters are also shown.
29. Press and release the "BOTTOM" element key or do not
operate for 15 s: the LED
appliance will leave the procedure.
To prematurely leave procedure, operate as follows:
30. Do not operate for 15 s (any changes will be saved).

"Cooking timer" function

Preliminary indications

The "cooking timer" function enables the time remaining counter
to start up.
Starting the cooking timer counter causes the cooking cycle to
start; interrupting the cooking timer counter causes the cooking cycle to be interrupted.
The counter is shown at the bottom of the "UPPER" display,
during counting the LED "TIMER" is on.
At the end of the cooking timer counting the buzzer is activated
and "End" flashes at the bottom of the "UPPER" display.

Set the cooking timer

The cooking timer is shown in the format "hours:minutes".
To set the hour, operate as follows:
1. Ensure that the appliance is not off and that no other
procedures are in progress.
2. Press and release the "CLOCK" key: the LED "TIMER"
will switch on and the bottom part of the "UPPER"
display will show the value of the cooking timer, the
hours value will flash.
3. Press and release the "INCREASE" key or the
"DECREASE" key within 15 s to set the hour.
To set the minutes, operate as follows:
4. Press and release the "CLOCK" key when setting the
hour: the minutes value will flash.
5. Press and release the "INCREASE" key or the
"DECREASE" key
within 15 s to set the minutes value.
To leave procedure, operate as follows:
6. Press and release the "CLOCK" key when setting the
minutes: the LED "TIMER" will switch off and the appliance will
leave procedure.
of the "LOWER" display will flash and
will go off and the
67