Friedrich Hazardgard Manuel D'installation Et D'utilisation page 19

Figure 23
STEP 4 CUT WINGBOARD PANELS: Measure and cut the wingboard panels from the supplied masonite (Item #8) to fit the spaces
between the side window channels and the sides of the cabinet (See Figure 23).
NOTE: AFTER CUTTING PANELS, MAKE A TRIAL TEST TO SEE IF THEY FIT THE SPACE WITH ABOUT 1/8" CLEARANCE BEFORE
GOING TO STEP 5.
Figure 24
STEP 5 ASSEMBLE CLIPS TO WINGBOARD PANELS: Assemble "J" type speed nuts (Item #9) and spring steel clips (Item #10) to the
edges of the cut wingboard panels (See Figure 24).
19