Dosing Unit - Reagents - Xylem Si Analytics TitroLine 5000 Mode D'emploi

136
A list of technical and so-called DIN/NIST buffers will appear (Fig. 121).
Fig. 121
After having determined the buffers, the selection is to be confirmed with «Accept values». If the distance
between 2 buffer values is too small (for instance, buffer 1 "6.87" and buffer 2 "7.00"), an error message will
appear (Fig. 122).
Fig. 122
5.2

Dosing unit - Reagents

You can set up the attachment size in the menu (20 or 50 ml), perform an attachment change and enter reagent
data, which are put out into the GLP documentation during manual titration (Fig. 123).
Fig. 123