IFM Electronic ecomat200 100 Série Mode D'emploi page 9

Programming
For programming terminals 6 and 7 must be linked, e.g. by means of
a key switch.
1
increment in active decade.
2
Press this key to change
from one decade to the
3
(= acknowledgement of
the parameter address).
increment in active decade.
4
Press this key to change
from one decade to the
5
(= acknowledgement of
the parameter value).
Interrupt the supply voltage briefly so that the new parameters become
effective.
If no key is pressed during the programming process for approx. 15s,
the unit will change into the operating mode with unchanged para-
meter values.
Operation of the unit is maintenance-free.
P
Press briefly.
Press this key to
other.
P
Press briefly
Press this key to
other.
P
Press briefly
The parameter address is
displayed, decade 2 is flashing.
The active decade is flashing.
The parameter value is displayed
(1st place is flashing).
The active decade is flashing.
Changing into operating mode;
actual value is displayed.