Programming The Towel Rail - Rointe T Série Mode D'emploi

2.2. Programming the towel rail

It is possible to programme the towel rail using the control panel.
In order to start the programming please ensure that the screen shows automatic mode with
the symbol . If the screen shows an
By pressing and holding
thing you will see is the sun symbol
mode temperature will also be displayed.
Using the and
the comfort mode, from 20ºC to 30ºC. This temperature will be applied later when programming
an hour with the comfort mode setting.
Once the comfort mode temperature is selected, press the
appears flashing. This symbol represents the economy (eco) mode. The economy mode
temperature will also be displayed.
Using the and
15ºC to 19,5ºC. The selected temperature will be applied later when programming an hour
with the eco mode setting.
Next we press the
from (Monday) to
represented by ,
Pressing the on/off button
To select another day to be programmed, use
directly from day to day
the on/off button so that it stops flashing.
Repeat this until all the days you wish to be programmed have stopped flashing. Once you are
ready, we can move on to programming hour by hour by pressing the
NOTE: At this stage, it is possible that you have programmed the radiator previously and you
are now changing the programming. When the days selected have different programming, they
will all change by default to the programming of the last day selected, which also happens
when programming with the remote control.
From the numbers we can see the selected hour in 24 hour display (00h is midnight,
01H, 02H,...). On the hourly programming bar at the bottom of the screen you will see the
programming for the whole day and the selected hour flashing.
Use the button to change between COMFORT (
every hour. Move through the hours using
using the button every time you wish to change the setting.
18
symbol, please press the
for 3 seconds the button we enter programming mode. The first
flashing, representing the comfort mode. The comfort
buttons we can increase and decrease the temperature desired within
buttons we can increase or decrease the eco mode temperature, from
button to move to selecting the days of the week that we wish to program
(Sunday). These numbers will initially be flashing and they will also be
, etc.
will select a day, which will stop flashing.
and day to day
button to change modes.
button so that the moon symbol
and to change the day (we can move
, if required) and select each day by pressing
symbol), ECO ( symbol) and OFF for
or and change each hour's programming
button.