Screen & Keypad; Functionality And Programming; Power On And Off; Set Point Temperature Selection - Rointe ELBA OVAL Manuel D'installation Et D'utilisation

4. SCREEN & KEYPAD
The control panel consists of 7 LEDs and 4 mechanical mechanical buttons with the
following functionalities:
1 2 3 4 5 6
7

5. FUNCTIONALITY AND PROGRAMMING

5.1. POWER ON AND OFF

To turn on the product, press the button
again.

5.2. SET POINT TEMPERATURE SELECTION

You can regulate the set temperature of the towel rail by the buttons
key increases the setpoint temperature. In the same way, pressing the
the setpoint temperature.
The minimum operating temperature is 7ºC and the maximum is 30ºC. The factory set
temperature is 21ºC. The 6 LED indicators, located in the upper part of the control panel,
identify the established setpoint temperature.
14
1 2 3 4
LED indicators
5 6 7
Power / Stand-by / Confirmation button
Increase temperature button
Decrease temperature button
Maximum power button
Infrared sensor
once. To turn off the product, press the button
and . Pressing the
key reduces