Manual Mode; Automatic Mode; Two-Hour Boost Mode (2H); Programming The T Series Towel Rail - Rointe T Série Mode D'emploi

1.5.1. Manual Mode

This enables to choose between the modes of operation COMFORT, ECO and ANTI-FROST,
changing the temperature as indicated in Section 1.4.
SYMBOL MODE TEMPERATURE RANGE
COMFORT 20ºC TO 30ºC
ECO 15ºC TO 19.5ºC
ANTI-FROST 8ºC

1.5.2. Automatic mode

This mode activates the programming set on the heated towel rail.

1.6. Two-hour Boost Mode (2H)

By pressing the key , the heated towel rail will work for two hours at maximum power,
regardless of any other mode. This mode takes priority over any other.
2H will be shown in the display when the heated towel rail is set at the two-hour mode, until
the two hours have finished or the key is pressed again.

2. PROGRAMMING THE T SERIES TOWEL RAIL

IMPORTANT NOTICE: PLEASE READ THE INSTRUCTIONS FULLY BEFORE STARTING THE
PROGRAMMING TO ENSURE A GOOD UNDERSTANDING OF THE PROCESS.

2.1. Adjusting the time and day

In order to adjust the time and day of the week, please follow the steps below. First we choose
the hour, then the minutes, then the day of the week:
To enter the time and day adjust mode, please ensure that the screen shows an symbol (if
the screen shows an symbol, press briefly to switch to manual operation) and press
and hold for 3 seconds the button.The hours will start flashing.
Select the hour using the and buttons to move the hour up or down.
Press once and the minutes will start to flash.
In the same way as with the hours, use and to increase or decrease the minutes to
select the correct time.
Once the minutes are correct press again so that the day flashes. This represents
Monday. With the button we can advance through to day 2 (Tuesday), day 3 (Wednesday)
etc. until we reach the required day. Press again to confirm the day and once more to
leave the time and date adjust mode.
17