Manual/Automatic Functions; Manual Function; Automatic Function - Rointe SYGMA Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

on the keypad. To cancel the two hour boost mode, press the

5.7. MANUAL/AUTOMATIC FUNCTIONS

Press the
button to toggle between Manual and Automatic functions. The symbol for the

AUTOMATIC function

MANUAL
This function allows you to change the product
between the COMFORT, ECO and ANTI-FROST
modes and to change the temperature.

5.7.1. MANUAL FUNCTION

This function allows you to vary the temperature by switching the product modes between
COMFORT, ECO and anti-freeze. The icons for COMFORT, ECO and ANTI-FROST will appear
when the temperature changes to the above ranges. Depending on the selected temperature
you will see one of these symbols on the display:
COMFORT
From 19ºC to 30ºC
5.7.2. AUTOMATIC FUNCTION
To start programming, check that it is in the Automatic function, with the display showing
the symbol
. If the display shows the symbol
Automatic function, press and hold
STEP 1- Select the COMFORT mode temperature.
The CONFORT mode
between 19ºC and 30ºC with the
and the symbol for the manual
ECO
From 7.5ºC to 18.5ºC
for 3 seconds to enter in programming mode.
and
SYGMA ELECTRIC TOWEL RAIL
button again.
will appear on the main display.
AUTOMATIC
This function will activate the programming that
has previously been set in the product.
press
to change function. Once in
buttons. The
icon and temperature will
EN
ANTI-FROST
7ºC
31

Publicité

Table des Matières
loading

Table des Matières