Limitations On Use; Explanation Of Type-Identifying Marking And Symbols; Nameplate - Dräger X-plore 8000 Notice D'utilisation

2.4

Limitations on use

To make sure that enough clean air is available, the Dräger
®
X-plore 8000 helmet with visor must only be used in conjunction with
the devices specified in section 2.3.
The protective effect can be impaired by the following factors:
high wind velocities and strong crosswind

earpieces or beards under the face cuff

2.5 Approvals
The Dräger X-plore 8000 helmet with visor complies with directive 89/
686/EEC on personal protective equipment. Refer to the Instructions
for Use of the respiratory protection system specified in section 2.3 for
information on the corresponding system approvals.
The safety helmet is approved in accordance with the following
standards:
EN 397:1995

EN 50365:2002

ANSI Z89.1-2003

The visor is approved in accordance with the following standards:
EN 166:2002-04

The earmuffs are approved in accordance with the following
standards:
EN 352-3:2002

Dräger X-plore 8000 Helmet with Visor
2.6 Explanation of type-identifying marking and
symbols
2.6.1 Name plate
The illustrated name plate serves as an example. The specifications
may vary depending on the helmet.
X-plore 8000
Helmet with Visor, black
1
Part-No.: R58325
2 EN 12941
with Dräger Powered Air Purifying Respirator
3
Date of manufacture: XX/2014
1 Product code
2 Approval marking
3 Date of manufacture
(example)
Description
6
Dräger Safety AG & Co. KGaA
5
23560 Lübeck, Germany
4
00921912.eps
4 Symbol "Follow instructions
for use"
5 Manufacturer
6 CE marking
15