Atag HI6271E Mode D'emploi page 32

OPERATION
10
EN 14
3. Press the menu button (A) of the desired cooking zone.
A single beep sounds. The display of the selected zone lights up,
the other displays are dimmed.
4. Slide your finger over the slide control (10) to set the desired
setting. Hold the slide control for at least 3 seconds at the desired
level.
An 'A' will appear in the display alternating with the selected
cooking level.
The table below shows the cooking levels and the corresponding boost
times.
Cooking level Boost time (minutes:seconds)
1 0:48
2 2:24
3 3:36
4 5:24
5 6:48
6 2:00
7 2:48
8 3:36
9 -:-
Switching off
1. Press the menu button of the desired cooking zone.
2. Select another cooking level using the slide control.
The boost switches off automatically.
Two cooking zones behind each other
• Two cooking zones that are behind each other influence each other.
The power is automatically distributed when these cooking zones
are used at the same time. This does not have any consequences
up to setting 9. Selecting the Boost setting for one of the cooking
zones, however, automatically switches the other cooking zone to a
lower setting.
• If one of the cooking zones is set to boost and you want to set the
other zone to setting 9 or Boost, the cooking zone that is set to
boost will automatically be switched to a lower setting.
• Two cooking zones that are beside each other do not influence
each other.