Steba DD 3 Smart Mode D'emploi page 22

Troubleshooting
Dear Client,
Thank you for buying this STEBA product. The following table will help you with pro-
blems that may occur when using your device. For many problems there is a simple
solution, because not everything that appears like a malfunction must be serious.
Please check the following list before contacting our customer service.
Problem
Device does not
work
Lid does not close
Lid does not open
Steam discharges
between lid and
housing
Safety valve does
not lock and no
pressure can be
built
Occasional bangs
Rice is too soft
Rice not totally
cooked
22
Reason
∙ It is not connected
∙ Fuse has failed
∙ Sealing ring is missing or
incorrect mounted
∙ Lid is not put correctly on
the device
∙ Pressure has not yet dis-
charged
∙ Safety valve is in lock po-
sition
∙ Sealing ring is damage or
soiled
∙ Not enough liquid in the
cooking pot
∙ Silicon plug on the valve is
soiled
∙ Cooking pot is damp at the
bottom
∙ Too much water
∙ To less water
Suggestion
∙ Check the plug
∙ Check the fuse
∙ Check the mounting of the
sealing ring
∙ Check the lid lock mark
∙ Release pressure with the
pressure release button
∙ Replace sealing ring
∙ Clean sealing ring
∙ Contact service
∙ Clean and dry before use
∙ Reduce water
∙ Add more water
∙ After cooking, leave the
rice for another 5 minutes
with the lid closed