Steba DD 3 Smart Mode D'emploi page 15

∙ You must not put any materials such as paper, cardboard, plas-
tic etc. into the appliance.
∙ This appliance is intended to be used in household and similar
applications such as:
o staff kitchen areas in shops, offices and others working
environments
o by clients in hotels, motels and other residential type en-
vironments
o bed and breakfast type environments.
∙ Before initial use: clean all parts carefully and leave to dry.
When used for the first time, the device can smoke slightly.
∙ Attention! Housing and glass get hot. Danger of
burns! Do not place the appliance on a sensitive sur-
face (e.g. painted furniture) and keep a distance of at
least 70cm to burnable materials.
∙ During operation steam emerge. Keep hands and face away.
Watch out for steam during cooking and when you pull out
the pot. Take appropriate distance to wall cupboards to avoid
damage of the veneer.
∙ This device is designed to automatically releases excess
pressure / steam during the cooking process. Before use, it
must be checked whether the pressure and safety valves are
clean and free of blockages. The sealing ring must be clean and
correctly installed. At the end of a cooking process, a signal
sounds before the steam is released.
∙ Make sure that the drain valve is not covered.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
15