Part 3 ▪ Menus - Programming For Advanced Users The Menu Functions Of The Wlanmaus - Roco and Fleischmann WLANmaus Z21 Mode D'emploi

Menus
The Menu Functions of the WLAN
The WLANmaus has three main menus with which you can both perform comprehensive programming
and change the basic settings of the WLANmaus. This menu level can be accessed using two simple key
combinations:
Press the MENU-key alone for approximately 5 seconds (the duration can be set in the "SETTINGS"
▪
menu), practical when using the WLANmaus with one hand.
Press the -key and MENU-key simultaneously..
▪
Either way the last used menu is opened. This is the "LOCO" menu when using the WLANmaus is used for
the first time. A scrolling text program integrated into the WLANmaus displays all the menu names with
more than 5 letters as scrolling text.
The display images in this manual depict the menu as an abbreviation with the complete name being
shown directly below the image.
Start location:
Normal Operation
LOCO
You use one of the arrow keys to continue in the menu level. You use the OK-key to call up the respective
submenu. The menus are all numbered. The numbers are shown at the bottom of the display.
Each of the four large main menus has its own pictograms for clear identification. They appear in addition
to the word "MENU". You will also find them in the respective submenus:
▪
Menu 1 "LOCO": Symbol „
▪
Menu 2 "PROGRAM": Lettering „Prog",
▪
Menu 3 "SETTINGS": Symbol „
▪
Menu 4 "ROUTES": Symbol
68
68
8010813920_II_2022.indd 68 8010813920_II_2022.indd 68
▪
Part 3
WLANmaus
or
or
Hold for appr. 5 seconds
PROGRAM
",
".
.
Menus
or
SETTINGS ROUTES
09.02.2022 09:16:51 09.02.2022 09:16:51