Entering A New Locomotive - Roco and Fleischmann WLANmaus Z21 Mode D'emploi

Calling up other locomotives already entered in the library ("scrolling"
Locomotives in the library are sorted in the order in which they were
entered. You can of course change this order:
Select locomotive
These key combinations (press keys together) move the locomotive up or down in the library. You can check
the new order for the library with the arrow keys.

2.2.2. Entering a new locomotive

(in the example, the DR 120 series "Taigatrommel" diesel locomotive):
Display
8010813920_II_2022.indd 57 8010813920_II_2022.indd 57
/
+
Input
/
...
Operation - Driving and Switching
+
or
Comment
You can find the free memory slot marked
"NEW ?" by scrolling through the library
using the arrow keys.
Confirm by pressing OK-key.
You then enter the locomotive name. 12
characters are available. In our example we
have abbreviated "Taigatrommel" to
"TAIGATROMM."
The first character is displayed with a flash-
ing cursor.
YThe "0" button is a "0" when pressed
again, a space is displayed after it has been
pressed twice. The cursor flashes and freezes
briefly after the correct character has been
entered before jumping to the next charac-
ter place.
To enter a space, press the "0" key once,
to get the "0", press the key twice. Special
characters can be entered by repeatedly
pressing the "1"or "0" key. Correct input
errors by using the left arrow key to move
back one or more spaces.
57
09.02.2022 09:16:26 09.02.2022 09:16:26