Privacy Zone - Comelit DOME IR PTZ Guide D'utilisation

<PATTERN>
PATTERN NO
CALL PATTERN
<PATTERN>
XXX/512
PRESET 1: SAVE
PRESET 2: BACK

4.2.5 Privacy Zone

<PRIVACY ZONE>
MASK NO
MASK
<SET MASK>
EXIT
<PRIVACY ZONE>
MASK NO
MASK
<SET MASK>
PRESET 1: SAVE
PRESET 2: BACK
Remark: The mask size is better more than double the target size. Setting the mask is
associated with the pitch angle which is advised to be equal to or less than 45°.
23
The figure at left shows the screen when the camera is ready
to record a pattern. "XXX" is the quantity of operator's
1
instructions used so far. The maximum amount of instructions
available to record is 512.
Remark: the precision of pattern is associated with the system
settings and module of the camera. When using the pattern, it
is recommended to turn off the privacy zone and unnecessary
display function.
 MASK NO.: Select the mask number. It depends on the
module supported.
 SET MASK: For detailed steps, please refer to the
01
"Example of Setting Mask 1".
 MASK: ON and OFF are selectable. Example of Setting
Mask 1
1: Move the cursor to MASK NO, which is be selected by
pressing the "right key".
2: Press the "up and down" keys in the keyboard to edit the
mask number, which is be entered by pressing the right key. "-"
01
means selecting this mode; hourglass symbol means editing
ON
this mode.
3: Move the cursor to <SET MASK> and press right key to set
the position of privacy zone. See the figure on the left below.
4: Move the joystick to aim at the object. Use the ZOOM+ and
ZOOM- keys in the keyboard to adjust the size of picture. And
use iris OPEN and CLOSE keys to adjust the size of mask.
Call preset 1 to save and exit and call preset 2 to exit directly.