Pole Mounted - Comelit DOME IR PTZ Guide D'utilisation

2.3.3 Pole Mounted

Fig 15
Installation conditions:
Pole mounted dome can be used in the hard pole structure in indoor and outdoor environment
whose diameter should match the installation size of stainless hose clamps. Factory default is 6
inches stainless hose clamps (fit φ130-152mm pillar). The pole structure can bear at least 4
times the weight of the dome. Install the pole mount accessory with the wall hanging bracket:
a. As shown in fig 16, use the stainless hose clamps to fix the pole mounted attachment with all
cable through it on the pole structure.
Fig 16
b. As shown in fig 17, fix the wall hanging bracket with all cables through it on the pole mounted
attachment.
15