Special Function Presets; Screen Character Operation - Comelit DOME IR PTZ Guide D'utilisation

Focus
Press FOCUS+ button to manually focus the camera on distant objects.
Press FOCUS- button to manually focus the camera on close objects.
Iris
Manual IRIS control is not supported on this camera module.
Preset Points
For SETTING, CALLING and DELETING presets, please refer to the instructions provided with
your PTZ controller.
Remark: some preset points are reserved for special functions. See below.

3.3 Special Function Presets

The following presets are predefined for special functions. CALL the corresponding preset using
your controller to activate the function:
PREST
33
34
75
76
77
78
79
80
81
82
83
84

3.4 Screen Character Operation

Call preset 95 to enter the OSD, call preset 94 to exit the OSD.
 Up or Down: move the option of the OSD or change the value on the OSD.
 Right: Enter the option, select the item or confirm.
 Left: Return to main menu or cancel
 Zoom Display Format: x XXX, XXX shows the present zoom of camera.
 Time Display Format: XXXX(year)-XX(month)-XX(day) XX(hour)-XX(minute)-
19
FUNCTION
Pan scan180 º
Reset
Call Pattern 1
Call Pattern 2
Call Pattern 3
Call Pattern 4
Digital zoom on
Digital zoom off
Auto day/night
Switch to night
Switch to day
Force on far light
PRESET
85 Force on near light
86
87
88
89
91
92
Set left point of A-B scan
Set right point of A-B
93
94 OSD menu Close
95 OSD menu Open
96
97
98
99
FUNCTION
BLC on
BLC off
Freeze on
Freeze off
A-B scan
scan
Call tour 3
Call tour 2
Call tour 1
Pan scan