About The Manual; General Product Information; Approval; Safety Advice - GOK BC-1 Notice De Montage Et De Service

Masquer les pouces Voir aussi pour BC-1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33

ABOUT THE MANUAL

• This manual is part of the product.
• This manual must be observed and handed over to the operator to ensure that
the component operates as intended and to comply with the warranty terms.
• Keep it in a safe place while you are using the product.
• In addition to this manual, please also observe national regulations, laws and
installation guidelines.

GENERAL PRODUCT INFORMATION

The BC-1 overfill sensor corresponds to the Zulassungsgrundsätze für Überfüllsicherungen
(ZG-ÜS) of the Deutsches Institut für Bautechnik (DIBt) as well as the requirements of a
overfill sensor as a safety equipment, e.g. according to DWA-A 791-1 (TRwS).
The BC-1 overfill sensor consists of an indicator and probe and is used to monitor the filling
procedure of a tank for water-endangering operating media.
Before the maximum permissible filling level in the tank is reached, acoustic and optical
alarms activate so that the filling procedure can end on time.
The BC-1 represents a safety overflow switch as an object within the meaning of the general
building approval which serves, as part of an overfill sensor, to prevent overfilling of tanks.
The plant components and the signal amplifier required for the signalling and control device
are not part of the BC-1 overfill sensor.

APPROVAL

• general building approval no. Z-65.11-428
• Belgium: AIB-VINCOTTE with prototype no. 99/H031/09030901
• Switzerland: SVTI certificate with no. 302.006.15

SAFETY ADVICE

Your safety and the safety of others are very important to us. We have provided many
important safety messages in this assembly and operating manual.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word
"DANGER", "WARNING", or "CAUTION". These words mean:
describes a personal hazard with a high degree of risk.
 May result in death or serious injury.
describes a personal hazard with a medium degree of risk.
 May result in death or serious injury.
describes a personal hazard with a low degree of risk.
 May result in minor or moderate injury.
describes material damage.
 Has an effect on ongoing operation.
describes a piece of information
2 / 16
Overfill prevention divice type BC-1
describes a call to action

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bc-1-4Bc-1-2

Table des Matières