By Universal Dmx Controller - BoomToneDJ SLIM PAR 7 TRI 3 Mode D'emploi

A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated, synchronized light show. This function is good when you want an
instant show. You have to set the first unit in Automatic,sound activated mode . Its DMX input jack
will have nothing plugged into it. The other units will have to select SLAV , Their DMX cables
plugged into the DMX input jacks (daisy chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU ,then find Addr ,press ENTER,when the 1 is showing on the display. Pressing
ENTER . Use DOWN and UP button change the DMX512 address. Once the address has been
selected, press ENTER button and then Press and Keep MENU button or storing automatically 8
seconds later. To go back to the functions without any change press the MENU button again.
5. DMX Value
3 channels Mode:
Channel
CH1
CH2
CH3
Value Function
0-255 RED dimmer
0-255 GREEN dimmer
0-255 BLUE dimmer
16