Dmx Controller - BoomToneDJ Double Beam 30 Mode D'emploi

want an instant show. The first fixture it's DMX input cable will have nothing connect
it, and the other fixtures will be set in slave mode automatically. Their DMX input
cables connect the last fixture DMX output cable (daisy chain). Any fixture can act as
a Master or as a Slave

DMX Controller

The fixture can be set the DMX address remotely by universal DMX controller. First,
you need to programming two scenes into a chase, and then link the fixtures to the
universal DMX controller. When you run the chase, all the fixtures of the chain will be
set the series DMX address automatically. The fixture uses four channels. Please refer
to the following diagram to set the address for the first four units.

16 channels DMX protocol :
CH
1
2
3
4
5
6
7
8
9
Feature
X axis motor stroke
X axis motor rotate
infinite
Y axis motor 1 stroke
Y axis motor 2 stroke
Motor speed
Total dimming
Strobe
Lamp beads 1color
selection
Lamp beads 2color
Specification
0-255 0°-------360°Positioning
0---15 None function
128---191 Anticlockwise rotation
from fast to slow
192---255 clockwise rotation
from slow to fast
0-255 0°-------185°
0-255 0°-------185°
0---255 From fast to slow
0---255 0------100 %
0---9 No strobe
10---255 Strobe speed from slow
to fast
8---255 Lamp beads 1color
selection
8---255 Lamp beads 2color
16