By Universal Dmx Controller - BoomToneDJ Crystal Ball Mode D'emploi

A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in Automatic,sound activated mode . Its
DMX input jack will have nothing plugged into it. The other units will have to select A001 ,
Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led lights will
constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the A001 is showing on the display. Pressing ENTER
button .Use DOWN and UP button to change the DMX512 address. Once the address has
been selected, press and keep with ENTER button .
DMX Value
Channel
1
2
3
4
5
6
Value
0-249 Strobe from slow to fast
250-255 Full On
0-255 Red dimmer
0-255 Green dimmer
0-255 Blue dimmer
0-127 Motor position
128-255 Motor rotation from slow to fast
0-10 Dimmer mode
11-37 Red
38-65 Green
66-93 Blue
94-121 3 color change mode
122-149 7 color change mode
150-177 7 color fade mode
178-205 7 color change with strobe mode
206-233 Sound Active mode 1
234-255 Sound Active mode 2
Function
- 12 -