Technical Specifications - BoomToneDJ SLIM PAR 7 TRI 3 Mode D'emploi

Button:
① MENU
② UP
③ DOWN
④ ENTER
⑤Signal indicator light
Note:
(3)No matter what the program in which a mode, as long as test to
DMX/SLAVE signal, and the program jump into DMX/SLAVE
mode. Since then, if detect no DMX/SLAVE signal, and the program
will automatically return to the original mode.

3- Technical Specifications


Input Voltage: AC230V 50Hz

Power consumption: 30W

Fuse: T 3A

LED: 7pcs 3w RGB in one high brightness LEDs

Dimension: 241*247*92mm
Weight: 2.2 kgs
To go forward select menu or go back the last level menu
To go forward select menu or increase parameters
To go backward select menu or reduce parameters
Go into the next level menu
In DMX or SLAVE mode, if detected signals, the
Signal indicator light flashing
(1)In a period of time, if has not been buttons to press, the LED display
will disappear. Press any button to turn the display on again.
(2)Whenever there is a button press, delay 2 seconds will automatically
to save all the parameters.
14