Other Settings - Topcom KIDZZZ BABYTALKER 3500 SEDS Manuel D'utilisateur

• If the 'Volume Off' setting is selected, the sounds picked up by the baby unit are only
indicated by the volume LEDs
9.8.2 Setting the Reproduction Volume of the Baby Unit
• This setting applies to the "Talking With Your Baby" and "Playing a Lullaby" functions.
– Press button
– Press button

9.8.3 Other Settings

The following settings can be configured from the menu (button
• Night light
• Lullaby
• Microphone sensitivity 'Sensitivity'
• Audible alert 'Sound Alert'
To navigate between menu items, use button
To select the indicated setting, press button
To return to a previous menu item or exit the menu, press button
9.8.4 Switching the Night Light On and Off
– Press button
– Press button
'On?' if the night light is off;
'Off?' if the night light is on.
– Press button
– Press button
• You can also switch the night light on and off directly on the baby unit by pressing button
8
9.8.5 Setting the Lullaby
– Press button
– Repeatedly press button
– Press button
– Repeatedly press button
'Stop?' if you want to stop the lullaby (only available if a lullaby is playing);.
'Select New' if you want to select a different lullaby (you have a choice of 3 lullabies);
'Play?' if you want to play the currently selected lullaby on the baby unit (not available when a lullaby is
playing).
– Press button
Option 'Select New' selected:
– Repeatedly press button
• If 'Play All' is selected, all three lullabies will be played in succession.
– Press button
– Press button
9.8.6 Setting the Temperature Monitor
In standby mode, the temperature measured by the baby unit (+/– 2 °C) is shown on the parent unit. You can
configure the following settings in this submenu:
• Temperature Range: allowable temperature range setting. If the measured temperature is outside this
range, this is indicated on the display ('High' or 'Low' and blinking temperature display).
• Temperature Alert: controls whether a double beep is generated when the temperature goes outside the
allowable range.
8
to increase the volume.
9
to decrease the volume.
11
27
. 'Night light' is displayed.
23
. You will see:
27
to select the indicated option.
27
to exit the menu.
23
.
. 'Night light' is displayed.
23
until 'Lullaby' is displayed.
28
.
27
or . until the desired option is displayed:
26 28
to select the indicated option.
27
or
26 28
to select the indicated option.
27
to exit the menu.
23
.
17
) of the parent unit:
23
• Temperature (units, allowed range, alert)
• Clock
• Feed time
• Display language 'Language'
(see "9.2 Setting the Display Language")
or button .
26 28
.
.
23
until the desired lullaby or 'Play All' is displayed.
Babytalker 3500 SEDS