General Safety Instructions - LaserLiner PowerCross-Laser 8 S Mode D'emploi

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and passed
on together with the device.
High-precision cross-line laser with 8 ultra-bright laser lines
– Homogeneous 360° laser line: The 4 horizontal laser diodes project
a homogeneous laser line.
– IR remote control allows the manual slope function for aligning inclines
to be controlled. The relevant axes are visually displayed via LEDs.
– A simple, precise plumb function is afforded by the additional plumb laser
at the bottom and the laser cross at the top.
– Out-Off-Level: is indicated by optical signals when the unit is outside its
self-levelling range.
– Bluetooth interface for remote control of the device
®
– Automatic levelling range 3°, accuracy ± 0,1 mm / m

General safety instructions

– The device must only be used in accordance with its intendedpurpose and
within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or
the battery charge is weak.
Safety instructions
Using class 2 lasers
14
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 / 650 nm
EN 60825-1:2014