Intended Use; General Safety Instructions - LaserLiner PocketCross-Laser 2G Mode D'emploi

Completely read through the operating instructions, the „Warranty and
Additional Information" booklet as well as the latest information under
!
the internet link at the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe place and if the
laser device is passed on, this document must be passed on with it.

Intended use

This cross-line laser projects a clearly visible green laser cross and is suitable
for aligning horizontals, verticals and inclinations. Optical signals indicate
when the unit is outside its self-levelling range. The product has an integral
hand-held receiver mode and a 1/4" tripod connection.

General safety instructions

– The device must only be used in accordance with its intendedpurpose
and within the scope of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach
of children.
– Modifications or changes to the device are not permitted, this will otherwise
invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the
battery charge is weak.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
10
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser < 1 mW · 515 nm
EN 60825-1:2014/AC:2017