Publicité
Les langues disponibles
Les langues disponibles
Controlling your home using Marmitek X-10 Home Automation Modules
The Marmitek 6 in 1 remote allows you to control practically everything electrical in
your home. It has X-10 IR technology that lets you control lamps and appliances
anywhere in your home remotely.
Here are just some of the things you can do with your Marmitek 6 in 1 remote using
the Marmitek X-10 feature:
•
Turn lights off or on and dim then while watching TV
•
Start the coffee from your bedroom when you wake up
•
Turn on lights at night to scare away intruders if you hear a noise
•
Turn on your electric blanket before the movie ends, so it's nice and warm to
go to bed
To control your lamps and appliances you need Marmitek X-10 Home Automation
Modules and the Marmitek IR 543 Mini Controller, which just plug into the existing
wall sockets. No extra wiring is needed. Ask your dealer for more information.
Controlling Marmitek X-10 Modules
You can control the Marmitek X-10 Modules as follows:
1.
Press and release the Marmitek X-10 button.
2.
Use the number buttons to enter the Unit Code number of the chosen Module
(You do not need to enter '0' first for a single digit number).
3.
Press the appropriate button for the function you require (see below).
Marmitek X-10 functions:
On:
Off:
Bright:
Dim:
All Lights On:
All Units Off:
Changing the X-10 House Code
The Marmitek 6 in 1 remote defaults to House Code A, and in most cases you will
not need to change this unless you are experiencing interference form a
neighbouring X-10 system.
1.
Press and release the Marmitek X-10 button.
2.
Press and hold SETUP until the LED indicator lights steadily. Release the
setup button.
3.
Use the number button to enter the number equivalent to the chosen House
Code (1=A, 2=B, .... 16=P).
4.
Press the ENTER button to confirm the House Code. The LED turns off.
Controlling an IR Mini Controller (IR543)
You will need to change the code in the remote to use it with the IR543 Mini
Controller. The code to control the IR mini Controller is 014. To change the code:
1.
Press and hold SETUP until the LED indicator lights steadily. Release the
SETUP button.
2.
Press and release the X-10 button.
3.
Enter 014 to control an IR Mini Controller. The LED turns off after the last digit
entered.
Troubleshooting
The remote won't control your A/V equipment, or does not work at all
•
Use manual controls or the original remote control to confirm the equipment is
working properly.
CHANNEL +
CHANNEL -
VOLUME +
VOLUME -
Power
Mute
5
Publicité
