SEVERIN AS 3914 Mode D'emploi page 10

facing the blade, onto the sliding tray.
∙ Switch the appliance on and move the
sliding tray towards the rotating blade. At
the same time, lightly press the end-piece
holder with the food towards the blade.
∙ The end-piece holder ensures safe
handling of the food while slicing.
∙ When removing the sliced food, keep
fi ngers and hands well away from the
blade, which is extremely sharp.
∙ Always switch the slicer off after use.
∙ For safety reasons, always bring the stop
plate back to its rest position after use so
that it is fl ush with the blade.
Practical hints
∙ When cutting a loaf of bread where the
crust is thicker or harder on one side, it
should be placed against the blade in
such a way that the fi rm side faces the
blade.
∙ When cutting cheese or very thin slices of
other foods, use a slightly damp cloth to
moisten the blade before cutting. This will
make the slicing process easier.
∙ When cutting ham, ensure that the fatty
side is facing upwards.
Cleaning and care
Clean the slicer before using it for the fi rst
time, or after a long period of non-use.
General
∙ To prevent perishable food particles from
collecting in the slicer, clean it thoroughly
after use.
∙ Always remove the plug from the wall
socket before cleaning the slicer or
detaching any accessories.
∙ Wait until the motor has come to a
complete standstill. Bring the stop plate to
10
its rest position so that the blade does not
protrude.
∙ To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in liquid of any kind.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ The sliding tray can be folded out for easy
access when cleaning the appliance.
∙ To clean the sliding tray, a damp, lint-free
cloth and a mild detergent should be
used.
∙ If necessary, the housing may be wiped
with a slightly damp, lint-free cloth.
∙ The safety holder can be cleaned using
hot water and a mild detergent (do not put
in a dish-washer).
Detaching and cleaning the blade
∙ Caution: the blade is extremely sharp,
beware of injury.
∙ The stainless-steel blade can be cleaned
with a slightly damp, lint-free cloth.
∙ The area behind the blade should also
be cleaned occasionally, using a slightly
damp cloth. To detach the blade, use a
suitable coin to turn the central locking
screw of the blade 90° in a clockwise
direction.
∙ When re-fi tting the blade, follow these
instructions in reverse.
Disposal
Devices marked with this symbol
must be disposed of separately
from your household waste, as
they contain valuable materials
which can be recycled. Proper disposal
protects the environment and human health.
Your local authority or retailer can provide
information on the matter.