Applications - SEVERIN AS 3914 Mode D'emploi

piece holder safely fi tted and in operating
position, unless the size or shape of the
food to be cut makes this impossible.
∙ Do not use any accessories or parts
other than those that accompany this
appliance or those recommended by the
manufacturer.
∙ This food slicer is not suitable for cutting
frozen food.
∙ Caution: do not touch the blade while
operating the appliance, and do not
attempt to stop it while it is still turning.
∙ Do not allow the power cord to come into
contact with the blade.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ Always remove the plug from the wall
socket
- after use,
- in case of any malfunction, and also
- before cleaning, assembling or
disassembling the appliance.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
∙ This appliance is intended for domestic or
similar applications, such as
- in shops, offi ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
∙ Caution: Any misuse can cause severe
personal injury.
∙ In order to comply with safety regulations
and to avoid hazards, repairs of
electrical appliances must be carried
out by qualifi ed personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance
one of our customer service departments.
The address can be found in the appendix
to this manual.
Before using this appliance for the fi rst
time
Clean the slicer before using it for the fi rst
time, or after a long period of non-use.

Applications

The slicer is designed for use with bread,
cooked meats, ham, cheese, cold roasts and
other food suitable for slicing.
Operation
Short-term operation
The appliance has been designed for short-
term operation only, i.e. the slicer should not
be operated continuously for more than 10
minutes. Switch it off afterwards and allow
the motor to cool down before switching on
again
Positioning the slicer
∙ Position the slicer on a fl at, stable
surface.
∙ Before the appliance is connected to the
mains, ensure that the On/Off switch is in
the Off-position.
Slicing
Follow the above instructions when
operating the slicer.
∙ Use the thickness selection knob to adjust
the desired thickness of the slices.
∙ Place the food to be sliced onto the
sliding tray and press it against the stop
plate.
∙ Fit the safety holder, with the studded side
to
9