Seca 384 Mode D'emploi Et Garantie page 17

Taring weight display (TARE)
The tare function is useful if an additional weight (such as cloths or a pad on the weighing
surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the scale
and activate the Tare function by de-
pressing and holding the HOLD/TARE
key.
The display of the scale is now reset to
0
" " and a normal weighing operation
can begin.
– You can now perform as many weigh-
ing operations as you like with this addi-
tional weight.
– TARA is deactivated by pressing the
button HOLD/TARE once again, or by
switching the scales off.
Storing the weight value (HOLD)
You can also continue displaying the weight determined once the load has been removed.
This makes it possible to put the baby down safely again before noting the weight:
– Press the HOLD/TARE key whilst the
load is on the scale.
The display flashes until a stable weight
has been measured. The display is then
frozen.
The value remains saved in the display
until the scale switches off automatical-
ly.
– The HOLD function can be switched off
by pressing the HOLD/TARE key
again.
0. 0
appears in the display if the scale
has no load on it, otherwise the current
weight. The "HOLD" display vanishes.
Note:
The HOLD function can also be used if the TARE function has been executed
beforehand.
Model 384/385 17
GB