General View (Fig. 1); Description Of The Machine - Proxxon TG 125/E Traduction De La Notice D'utilisation Originale

Translation of the Original Operating Instruc-
tions TG 125/E disc grinding machine
Contents:
1 General view (fig. 1)
2 Description of the machine
3 Scope of delivery
4 Technical data
5 Before work
5.1 Setting up your disc grinding machine
(fig. 2):
5.2 Removing and inserting the grinding
table (fig.3):
5.3 Affixing and replacing grinding wheels
(fig. 4):
5.4 Adjusting the grinding table angle
(fig. 5):
5.5 Connecting the dust exhaust
(fig. 6):
6 Working with the TG 125/E disc
grinding machine
6.1 Working with the angle stop (fig. 7):
6.2 Notes on grinding speed
7 Care and maintenance
8 Disposal
9 CE conformity declaration
Dear customer!
Using these instructions
• makes it easier to get familiar with the device
• prevents malfunctions caused by improper han-
dling, and
• lengthens the service life of your device.
Please keep these instructions readily accessible at
all times.
Use the device only when you have understood it
exactly and always adhere to the instructions.
PROXXON is not liable for the safe functioning of the
device in cases of:
• handling that does not conform to the usual usage,
• purposes of use not designated in the instructions,
• disregard of the safety instructions.
You are not entitled to guarantee claims in cases of:
• operator errors,
• inadequate maintenance.
For your own safety, please follow the safety instruc-
tions exactly.
Use only genuine PROXXON replacement parts.
We reserve the right to make improvements in the
sense of technical progress. We wish you much suc-
cess with the device.
WARNING!
11
Read all safety warnings and instructions.
11
Failure to follow all safety warnings and
12
instructions listed below may result in electric shock,
12
fire and/or serious injury.
13
KEEP ALL SAFETY WARNINGS AND
INSTRUCTIONS FOR THE FUTURE!
12
Do not use damaged bits and cutters. Before each
13
use, inspect bits and cutters such as sanding
discs for chips and cracks, grinding discs for
13
cracks, strong wear or tear. After you have
inspected and installed the bits and cutters, keep
14
yourself and any other persons in the vicinity
away from the plane of the rotating bits and cut-
14
ters and run the device at maximum rotational
speed for one minute. Damaged bits and cutters
14
usually break during this test time.
14
15
15
15
1

General view (fig. 1)

15
1. Grinding disc
2. Swivel-mounted grinding table
3. Rotary knob for speed control
4. On-off switch
5. Angle stop
6. Mains cable
7. Connecting piece
8. Guide slot for angle stop
9. Clamp
10. Locking button for angle adjustment
11. Grinding discs
13. Rubber connector
2

Description of the machine

Thank you for purchasing the TG 125/E disc grinding
machine. You now own a high-precision machine to
use in grinding work for which complete accuracy is
required.
A high-precision manufactured and carefully bal-
anced grinding disc with double ball-bearing direct
drive guarantees excellent smoothness, precision
concentricity and minimum wear.
GB
- 11 -