General Safety Instructions - Würth 0714 64 100 Mode D'emploi

GENERAL SAFETY INSTRUCTIONS

(1) Before using this product, please read and understand all safety instructions.
Safety instructions should always be followed to reduce the risk of injury and
damage.
(2) Any other use different from that stated in this manual may cause damage to
the product and present a serious hazard to the user or any other person.
(3) The safety instructions and instructions given in this manual are not able to
exhaustively illustrate all situations that may occur.
(4) The user must use the product with common sense and caution especially
regarding what is not indicated in this manual. Only adults who have
received proper instructions should use this product.
(5) Do not use the product if the switch is no longer controlling the shutdown and
running. Any defective switch must be replaced by authorized service or
qualified personnel to avoid any danger.
(6) The user and / or operator of the product is solely responsible for damage
and injury to property and persons / animals.
(7) Unless otherwise specified in the instructions, it is recommended that an
approved service have any damaged parts repaired or replaced; otherwise,
there may be a danger.
(8) Do not point the laser beam at people or animals, vehicles, reflective surfaces
and never look into the laser beam (naked eye or through optical instruments)
even at great distances.
(9) Test the equipment on known sources before use, to ensure that it operates
properly.
(10) If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
(11) The laser device inside the equipment may be inspected, repaired or
replaced by the manufacturer only.
(12) After repair, this equipment must be re-evaluated to meet the safety
requirements in accordance with
IEC/EN61010-1:2010.