Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS OF USE
This laser is a high precision measuring device. Use this unit strictly following the
following instructions to ensure optimal performance.
(1)
Do not point the device towards the sun or other bright light sources, this will
give erroneous or inaccurate measurements.
(2)
Do not use the device in harsh, humid, dusty environments. Prolonged
exposure to adverse environments can damage the internal components of
the device or cause erroneous measurements.
(3)
Do not operate the device in an explosive atmosphere, for example in the
presence of flammable liquids, gases or dust. The device produces sparks
that can ignite dusts or vapours.
(4)
When the appliance is confronted with a sudden temperature change, it can
only be used when it is calibrated at its new temperature.
(5)
IMPORTANT: adverse conditions can shorten the range of the measurement
and reduce its accuracy (e.g. high solar brightness or a very bright working
environment, a surface to be measured with low reflectivity, high surface area
reflective, or rough surface, on light coloured liquids, clear glass, polystyrene
foams or low-density objects). Under these conditions it is recommended to
use this instrument with a target (i.e. a white wall or a sheet of white paper);
otherwise the risk of measurement error will be increased.
(6)
Check the accuracy of the device before reusing it whenever it falls or is
compressed.
INTENDED USE
The product is intended for use indoors for the measurement of distances, lengths,
heights, spacings.
Publicité
Table des Matières
