For Your Safety; Safety Instructions - Würth VSG 48 DB Traduction Des Instructions De Service D'origine

GB
Please read and comply with these
instructions prior to the initial
operation of your device.
Retain these instruction manual for
future reference or for subsequent
possessors.
It is not allowed to modify the
device or to manufacture
additional devices for this
tool. Such modifications can
cause injuries and malfunc-
tions.
Only authorized and trained personnel are
■
allowed to perform repair works on the
device. Only use genuine spare parts from
Adolf Würth GmbH & Co. KG. This ensures
continuous device safety.
The device may only be used
to drive screws in accordance
with the specifications
provided in the section on
technical data. It is designed
for industrial and commercial
use only.
Only use the device when you are familiar
■
with the handling and potential dangers.
The device should only be driven by screw-
■
drivers approved by Würth.
It is imperative that you adhere to the instruc-
■
tion manual and the safety instructions of the
screwdriver in use.

For your safety

In case you do not adhere to this instruction
manual and the safety instructions, this may result
in damage on the device and cause dangerous
situations for the operator and other people.
In case of transport damage inform vendor
immediately.

Safety instructions

Never aim the device at yourself or at other
■
persons when it is ready for operation.
Insert the screws only when the device is
■
switched off.
Secure the workpiece against slipping when
■
driving in screws.
Before switching on the device, stand in a
■
stable position. Hold the device with both
hands during operation.
Never reach near the screwing area while the
■
device is running.
Strictly follow the instructions given below in
■
order to avoid malfunctions and misuse!
Check that the dimensions of the screws are in
■
accordance with the specifications given in the
section on technical data.
Make sure that the screws are suitable for the
■
kind of material they are to be used with.
Only use original bits and replace them im-
■
mediately when they show signs of wear or
damage.
Switch the screwdriver to CLOCKWISE ROTA-
■
TION.
It is not recommended to remove screws using
■
the rotation direction COUNTERCLOCKWISE with
the device.
Use only genuine Würth accessories
■
and spare parts.
WARNING − Prior to the first
start-up, it is definitely necessary to
read the Safety instructions!
7