0. USE AND CONSERVATION OF THE HANDBOOK
This handbook for use and maintenance is an integral part of the aerator with which it is supplied, and must be kept at immediate
disposition for the machine's users and within its operating environment.
The handbook must be conserved in good conditions and protected from atmospheric agents, from humidity and any other source of
damage. In case of loss or damage a new copy must be ordered from the manufacturer (1.1).
The operator in charge must read the handbook with attention before, and, if necessary, during the installation and start-up of the
machine.
Possible updating must be carefully examined and added in a permanent way to the handbook.
The following pictographs point out parts of the text to be considered with particular attention:
Operations to be carried out by specialized personnel.
General danger.
Electrical hazard.
Very important advice.
1. GENERAL INFORMATION
1.1
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
PASTORE & LOMBARDI S.R.L.
Via Don Minzoni, 3
40057 Cadriano Di Granarolo Dell'Emilia, Bologna – Italia
www.pastorelombardi.com
12V AERATOR ITEM NO. 0834 26156A / 24V AERATOR ITEM NO. 0834 26157A
1.2
SECURITY ADVICES
-
Use only for intended purpose and in operating conditions specified under 2.1,3.
-
Fully assemble all supplied parts and only these, according to the added instructions.
-
Do not remove protections and/or parts with the same purpose (grill, mesh filter, external metal housing).
-
Do not prevent the fan from free rotation.
-
Do not occlude the air intake.
-
Do not expose to atmospheric agents.
-
Avoid direct spraying through grill or air intake.
-
PASTORE & LOMBARDI S.r.l. shall not be liable for malfunction or impaired working safety caused
by non-compliance with the recommendations specified in this user's handbook.
1.3
TECHNICAL ASSISTANCE AND SPARE PARTS
The installation and technical assistance is exclusively in the care of the vehicle's supplier or the authorized professional
outfitter. See spare parts on catalogue Pastore & Lombardi at the item term «ventilator-aspirator».
2. APPLIANCE DESCRIPTION
2.1
GENERAL DESCRIPTION
Electro ventilator at varying speed for the fixed installation on vehicles, operating with the vehicle battery tension. the purpose
of the appliance is introduction or ejection of air from or into the external environment, which is materially separated from the
space to be ventilated by an automatic device with closed fins when fan is not working.
2.2
TECHNICAL SPECIFICATIONS
Voltage of supply:
Max current draw:
Maximum absorption:
Flow rate:
Weight:
Noise level:
Working temperature:
Type 24-V: 24Vcc±10%; Type 12-V: 12Vcc±10%
100 W
Type 24-V: ≈ 5A; Type 12-V: ≈ 10A
3
500 m
/h
7 kg
<70dB(A)
(-20 ÷ +70)°C
10