Tyres; Chain; Check And Adjust Tightening Chain - Beta Motorcycles RR 350 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4

TYRES

Only fit tyres approved by BETAMOTOR.
Unsuitable tyres can adversely affect the road holding of the vehicle.
• To protect your safety, immediately replace any damaged tyres.
• Slick tyres adversely affect the road holding of the vehicle, especially on wet roads
and in off-road riding.
• Insufficient pressure results in abnormal wear and overheating of the tyres.
• The front and rear tyres must have the same tread design.
• Always measure the inflating pressures when the tyres are cold.
• Keep the tyre pressures within the prescribed range.

CHAIN

Checking the drive chain periodically to ensure longer chain life. Always keep it
lubricated and clean of deposited dirt.
Take special care in preventing the lubricant from coming into contact with the rear
tyre or brake disc, otherwise the tyre grip and the action of the brake would be greatly
reduced, making it very difficult to control the vehicle.
CHECK AND ADJUST
TIGHTENING CHAIN
Position the drive on a flat base ensuring
stability.
If the chain play exceeds 30÷35 mm ten-
sion the chain.
30÷35 mm
GB
61

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rr 390Rr 430Rr 480

Table des Matières