2
USE ON PARTICULARLY WET AND MUDDY SOILS
Apply an anti-water cap for the water filter
Assemble a steel crown. For this operation contact the Betamotor service net-
work.
Verify that the radiator fins are clean
Verify that the radiator fins are not bent
After use, proceed with washing (page 67)
DRIVING IN HIGH TEMPERATURE AND LOW SPEED CONDITIONS
Adjust crown size based on the route.
Note: The oil has a tendency to heat up quickly when there is frequent clutch
use and when using a crown whose dimensions are excessive. For this opera-
tion contact the Betamotor service network.
Clean the chain
Verify that the radiator fins are clean
Verify that the radiator fins are not bent
Verify cooling liquid level (page 43)
For this use it is recommended to use an electric fan (optional). For the code,
refer to the Betamotor accessory catalogue.
DRIVING IN LOW TEMPERATURE AND SNOW CONDITIONS
Apply water protection to the air filter
After use, proceed with washing (page 67)
GB
30