Electrical Diagram; Ce Declaration - PLYMOVENT MULTIDUST BANK Manuel Opérateur

MultiDust® Bank Control box
Produkt No:
A All models
B CONT-B24
C CONT-B64
D CONT-BF24
E CONT-BF64
F CONT-C24
G CONT-C64
H CONT-CF24
I CONT-CF64
Abreviations
X = Order as requiered, state requiered length.
Pos Art. No: A B C D E F G H I Description
1 940 700
940 718
940 726
940 734
2 939 805 1
3 939 801 1
4 939 520 1
5 935 411
6 939 068
7 935 874
8 941435-Z
9 935932-1500
10 940 684
940 692
When ordering spare parts please quote:
•Product No. (see label) • Batch No • Description • Part No • Quantity
For example: CONT-C24, 00040, main switch, 935874, 1 pc
8

ELEctRicaL DiagRaM

Refer to the electrical diagrams on pages 185-193.
9 DiSpOSaL
After life of the product, dispose it of in accordance with
federal, state or local regulations.

cE DEcLaRatiON

CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Wezelkoog 11, 1822 BL
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the product(s):
- MDB
which this declaration refers to, is in accordance with the
conditions of the following Directive:
- Machine Directive 2006/42/EC
- EMC directive 2004/108/EC
- LVD 2006/95/EC
- ISO 1512-1 (2005)
0000100513/011212/0 MDB
© Copyright: All right reserved. All information within this printed matter may not be reproduced,
handed over, copied, xeroxed or translated into another language, in any form or any means without
written permission from PlymoVent AB. PlymoVent AB reserves the right to make design changes.
Decription
All models of Control box MultiDust® Bank
1 1 Circuit card 24 valves
1 1 Circuit card 64 valves
1 1 Circuit card, pressure control 24 valves
1 1 Circuit card, pressure control 64 valves
Fuse 2.0 AMP
Fuse 3.15 AMP
Transformer
1 1 1 1 Contactor A&B C16
1 1 1 1 Overload A&B 3,2-16A
1 1 1 1 Main switch
1 1 1 1 Fan switch
1 1 1 1 Pressure switch
1 1 1 1 Circuit card display, C- controllers
1 1 1 1 Circuit card display, B- controllers
SPARE PARTS LIST
Alkmaar, the Netherlands, 1 December 2012
Ir. F. Coehoorn
Vice President Research & Development
An installation is defined as a combination of several finished
products or components that are assembled by an installer
at a given place. The various parts of the installation are
intended to operate together in a particular environment and
to perform a specific task. The entire installation must
comply with the relevant directives and standards. The
assembly instructions given by the manufacturer, as well as
the whole method of installation, must be in accordance with
good engineering practices within the context of installations,
as well as installation rules. Considering the above, the
installer will be responsible for completing the installation
and issuing the final CE Declaration of Conformity.
BSAB No: T3.1
Ser. No: MDB / RR
Date: Mar -09
Replace: Nov -07
Note
MultiDustBank/Eng/29/
33
0