Fein Slugger AJMU137 PMQW Mode D'emploi page 21

Adjusting the stroke range (figure 12).
Hold the power tool firmly
CAUTION
with one hand when releasing
the two fastening levers.
To move the fastening levers over each other,
pull a fastening lever outward and then turn
the fastening lever in 45° steps.
Loosen both fastening levers with the other
hand.
Adjust the desired stroke range.
Tighten both fastening levers again.
Fig. 12
2.
2.
1.
4.
2.
4.
2.
3.
1.
en
21
1.
3.
2.
4.
2.
4.