Operating; Helpfunction - Grundig Digta 7 PUSH Mode D'emploi

operating

internal/externalmemory
Dictations are stored on the internal memory of the Digta as long
as no external, removable memory card (Digta Card*) is inserted.
As soon as a Digta Card is inserted, all dictations will be stored
on this memory card. Copying between the internal memory and
the external memory card is impossible.
Display "Memory card active"
The icon "memory card active" pops up on the display.
Helpfunction
The Digta offers a help function. Brief help texts shall support
you by using your dictation machine correctly. Additional infor-
mation is put at disposal when special operating situations occur,
for example, during the recording of dictations or in the menu.
x Please press briefly the lower function button until the brief
help texts are displayed.
x Press the lower function button again or the "OK" button in
order to close the help texts.
You will be resetted to the initial situation/screen.
Profiles
Default settings of profiles
The Easy Mode and the Menu Mode are available in form of
predefined default profiles. However, the system administrator
can change these profiles by means of the configuration soft-
ware and transfered them to the device.
EasyMode
All functions needed for dictating, play-back, deleting or inserting
of dictations are available in the Easy Mode.
The display is organized more clearly in the Easy Mode. The risk
that operating errors are made is diminished because only the
most important functions can be activated.
In the menu of Easy mode, you can view important information
about your Digta under "Device info", e.g. serial number, versi-
on of the device software (firmware) or the current status of the
operating
En
27