Repair And Warranty - Megger BMM2500 Guide De L'utilisateur

The instrument circuit contains static sensitive devices,
and care must be taken in handling the printed circuit
b o a rd. If the protection of an instrument has been
impaired it should not be used, and be sent for repair by
suitably trained and qualified personnel. The protection is
likely to be impaired if, for example, the instrument shows
visible damage, fails to perform the intended measure-
ments, has been subjected to prolonged storage under
unfavourable conditions, or has been exposed to severe
transport stresses.
New Instruments are Guaranteed for 3 Years from the
Date of Purchase by the User.
Note: Any unauthorized prior repair or adjustment will
automatically invalidate the Warranty.
Instrument Repair and Spare Parts
For service re q u i rements for MEGGER
contact:-
AVO INTERNATIONAL or
Archcliffe Road
Dover
Kent, CT17 9EN.
England.
Tel: +44 (0) 1304 502243 Tel: +1 (610) 676-8579
Fax: +44 (0) 1304 207342 Fax: +1 (610) 643-8625
or an approved repair company.

Repair and Warranty

®
I n s t r u m e n t s
AVO INTERNATIONAL
Valley Forge Corporate Center
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Approved Repair Companies
A number of independent instrument repair companies
have been authorised for repair work on most MEGGER
instruments, using genuine MEGGER spare parts. Consult
the Appointed Distributor/Agent regarding spare parts,
repair facilities, and advice on the best course of action to
take.
Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it
should be sent freight pre-paid to the appropriate address.
A copy of the invoice and of the packing note should be
sent simultaneously by airmail to expedite clearance
through Customs. A repair estimate showing freight return
and other charges will be submitted to the sender, if
required, before work on the instrument commences.
27