Datalogging - Megger BMM2500 Guide De L'utilisateur

the above order. Hold a key down to auto-
repeat. A long bleep is sounded when the end
of the list is reached.
7. Press the EXIT button to return to the circuit
number selection screen, or press the
to scroll through the stored test results,
together with any additional connection
information.
Download to PC
The BMM series has been designed to be used
with AVO Powersuite for Windows which will
accept the test results and enable the production
of various certificates,
Inspection and Completion. The CD supplied with
the instrument contains AVO Download Manager
Program. This enables stored and data-logged
results to be downloaded to a PC, the creation of
simple test report files which may be exported to
other applications and used to create data back-
ups or reports/certificates. Download manager
also enables certain changes to be made to your
instrument setup such as changing the 2nd lan-
guage of the printouts. The CD contains a user
16
key
including Periodic
guide giving you full instructions on the use of
Download Manager.
Cable Configuration
Normally, a double-ended 9-way 'D' female socket
lead suitable for connecting PC to PC is required.
This lead should not exceed 3m in length. A lead is
available as an accessory, or one can be made up
as follows:–
Signal Insulation Tester 9-way 'D'
Rx 2
Tx 3
DSR 6
GND 5

Datalogging

Datalogging means the automatic recording of
measurements at regular intervals over an extend-
ed period, for viewing at a later time. Results are
held in the internal memory of the tester, but can
only be extracted by means of a PC connected via
the RS232 port.
25-way 'D'
3 2
2 3
4 20
5 7