Megger BMM2500 Guide De L'utilisateur page 16

Delete all data
1. Move the rotary selector switch to the RCL
position. The code rcl is displayed.
∼
2. Press the and
code dEL is displayed.
3. Confirm that the data is no longer required by
pressing the
other key. The code rcl is displayed.
Print Results (see Setup Modes)
1. Connect printer and the instrument with a ser-
ial printer lead.
2. Move the rotary selector switch to the RCL
position. The code rcl is displayed.
3. Commence the printout by pressing the TEST
button. Abort at any time by pressing and hold-
ing the k e y. The code rc l is displayed.
Retrieve Stored Results
It is possible to view previously stored test results
by switching the rotary switch to the RCL position.
1. Move the rotary selector switch to the RCL
position. The code rcl is displayed.
2. Select the re q u i red distribution board by
∼
pressing the
keys together. The
key or abort by pressing any
and keys.
The distribution board numbers are shown in
the order that the results were stored. A long
bleep is sounded when the end of the list is
reached.
3. Press the key to list the circuit numbers
used in the currently displayed distribution
board or press the EXIT button to return to the
RCL display.
4. Select the required circuit number by pressing
∼
the and
are shown in the order that the results were
stored. A long bleep is sounded when the end
of the list is reached.
5. Press the EXIT button to return to the distribu-
tion board selection screen, or press the
XXXXXkey to show the stored test codes. The
following codes are used to identify test
results:-
Code Meaning
Con Continuity Test
InS Insulation Test
6. Select the re q u i red test by pressing the
∼
and
keys. The circuit numbers
keys. The tests are shown in
15