29 8.6 Aligning The Precision Holder; Measuring The Distance With The Laser - Bosch SCT 415 S52 Notice Originale

8.6 Aligning the precision holder
¶
Use the spirit levels to align the precision holder
by turning the positioning feet on the base plate by
means of the star knob screws.
!
For static windshield camera calibration, the
SCT 415 S52 must be aligned using the roll angle
and pitch angle spirit levels.
2
5
4
Abb. 11: Aligning the precision holder
1 Precision holder
2 Roll angle spirit level
3 Pitch angle spirit level
4 Leveling foot
5 Tape measure mount
¶
Fasten the tape measure holder on the cross beam.
Robert Bosch GmbH
3
2
5
3
1
4
4
Operation | SCT 415 S52 | 43
8.7

Measuring the distance with the laser

Abb. 12: Measuring the distance with the laser
1 Laser tape measure
2 Spirit level
3 Wheel locating pin
4 Leveling foot
1. Place the wheel locating pin (3) in the center of the
wheel.
2. Align the spirit levels (2) with the aid of the leveling
feet (4).
3. Read the distance shown in the laser tape measure
(1).
en
1
2
3
4
|
1 690 386 051 2020-10-22