Attaching The Pointer; Holder; Cross Beam - Bosch SCT 415 S52 Notice Originale

5.9

Attaching the pointer

1. Loosen the self-tapping screws.
2. Attach the indicator and secure it with the self-tapping
screws.
1
2
1 Self-tapping screws
2 Pointer
5.10

Holder

¶
Attach holder.
1
1 Knurled screw
2 M6 nut
Robert Bosch GmbH
2
Assembly | SCT 415 S52 | 35
5.11

Cross beam

¶
Attaching the cross beam.
1
4
1 Mounting
2 Fastener
3 Lever fastener
4 Cross beam
1. Insert the fastener through the mounting.
2. Position the cross beam in the mounting.
3. Screw in the fastener.
4. Center the cross beam in the mounting.
5. Tighten the grub screw until it makes contact with
the cross beam and then secure on both sides.
6. Secure with fastening lever.
1 Grub screw
2 Nut
en
2
3
|
1 690 386 051 2020-10-22