Mounting The Large Measurement Board; Mounting The Small Measurement Board - Bosch SCT 415 S52 Notice Originale

en 38 | SCT 415 S52 | Assembly
5.17 Mounting the large measurement
board
3
Abb. 3: Fastening the large measurement board
1 Position 1
2 Position 2
3 Mounting arm for large measurement boards 1)
¹) May be included in the scope of delivery depending on the version
ordered
¶
First, fasten the long measurement board at position
1 and then at position 2.
x
Abb. 4: Distance
x Distance at position 1
i
If the attachment at position 1 is correct, there will
a clearance (x) between the measurement board
mount and the mount.
i
At position 2, the measurement board must lie flush.
i
If (x) is very large, install second O-ring.
|
1 690 386 051 2020-10-22
1
2
5.18 Mounting the small measurement
board
Abb. 5: Fastening the small measurement board
1 Safety cord
2 Slide
3 Small measurement board
1. Attach the small measurement board to the slide.
2. Engage the securing cable.
!
Measurement boards:
$
Make sure that the measurement boards lie flush
$
Replace damaged measurement boards.
2
1
3
Robert Bosch GmbH
2