29 8.3 Correcting The Position Of The Sct 415 S52 - Bosch SCT 415 S52 Notice Originale

F
G
Abb. 8: Alignment based on the floor markings
1 Laser beam
2 Floor marking
3 Vehicle alignment
Robert Bosch GmbH
3
H
E
Operation | SCT 415 S52 | 41
G`
G
90°
8.3 Correcting the position of the
SCT 415 S52
1. Release the eccentric clamp.
2. Correct the position.
3. Lock the eccentric clamp.
1 Eccentric clamp
en
|
1 690 386 051 2020-10-22