Securing The Cross Beam In The Cross Beam Mounting; Instructions On Back Of Measurement Board - Bosch SCT 415 S52 Notice Originale

5.15 Securing the cross beam in the cross
beam mounting
1. Carefully loosen cross beam and position it in the
mounting.
2. Press and hold the button in the head of the secu-
ring pin.
 The ball lock on the securing pin will be retrac-
ted.
3. Slide the securing pin through the openings in the
mounting.
4. Release the button on the head of the securing pin.
 The ball lock on the securing pin will be exten-
ded.
"
The cross beam is secured in the cross beam mounting
by the securing pin.
i
Pay attention to the direction the cross beam is
positioned in the mounting.
5
2
1
3
Abb. 2: Precision measuring bar in the cross beam mounting
1 Cross beam mounting
2 Cross beam
3 Securing pin
4 Ball lock
5 Openings in the cross beam mounting
Robert Bosch GmbH
4
3
5
Assembly | SCT 415 S52 | 37
5.16 Instructions on back of measurement
board
!
Follow the instructions for the measurement boards
listed below:
$
1 690 382 590
$
1 690 382 608
$
1 690 382 308
$
1 690 382 329
$
1 690 382 617
$
1 690 382 642
(may be included in delivery, depending on the version ordered.)
en
|
1 690 386 051 2020-10-22