Masimo RD rainbow SET Mode D'emploi page 3

RD rainbow SET™
Adhesive Replacement Tapes
Single patient use only
DESCRIPTION
The RD rainbow SET™ adhesive replacement tapes are used to replace the attachment tape portion of the RD rainbow SET
infant (Inf ) and neonatal (Neo) adhesive sensors in the event that the tape becomes soiled or torn prior to the end of sensor
life.
INSTRUCTIONS
1. Remove the existing tape and discard (Fig. 1).
2. Remove the replacement tape from the release liner (Fig. 2).
3. Position the replacement tape over the sensor and press in place (Fig. 3).
The following symbols may appear on the product or product labeling:
SYMBOL DEFINITION
Consult instructions for use
Follow instructions for use
Manufacturer
Use-by date YYYY-MM-DD
Do not re-use/Single patient
use only
Non-Sterile
Not made with natural rubber latex
LATEX
Instructions/Directions for Use/Manuals are available in electronic format @ http://www.Masimo.com/TechDocs
Note: eIFU is not available for CE mark countries
D I R E C T I O N S F O R U S E
Not made with natural rubber latex
LATEX
PCX-2108A
02/13
SYMBOL DEFINITION
Do not use if package
is damaged
Masimo reference number
Mark of Conformity to European
Medical Device Directive 93/42/EEC
Authorized representative in the
European community
Lot code
Catalogue number (model number)
Caution: Federal (USA) law restricts this device to sale by or on the order of a physician.
3
Non-sterile
SYMBOL DEFINITION
Pediatric patient
Storage humidity limitation
Storage temperature range
Keep dry
Atmospheric pressure limitation
Caution
en
9831A-eIFU-1217