cosori CP158-AF Manuel D'utilisation page 15

Preset Air Frying Programs
Using a preset is the easiest way to air fry. Presets are programmed with an ideal time and
temperature for cooking certain foods.
1. Preheat your air fryer (see page 13).
2.
When your air fryer displays "READY",
add food to the baskets.
3.
Select a preset cooking program
(see page 14).
4. Optionally, customize the temperature
and time. You can do this anytime
during cooking.
Press Temp/Time
The temperature will blink on the
display. Press the
change the temperature
(170–400°F / 77–205°C).
a. Temp/Time
Press
The time will blink on the display.
+
Press the or
the time (1–60 minutes).
Note: To rapidly increase or decrease time or
temperature, press and hold the
5.
Press to begin air frying.
6.
When using certain presets, the Shake
Reminder will appear halfway through
cooking time. The air fryer will beep 5
times, and "((SHAKE))" will blink on
the display.
a. Take the baskets out of the air
fryer, being careful of hot steam.
The air fryer will pause cooking
automatically. The display will turn
off until the baskets are replaced.
b. Shake or flip the food. Be careful
not to press the basket
release button.
once.
+ or – buttons to
a second time.
–
buttons to change
+ or - buttons.
c.
Put the baskets back into the air
fryer.
Note: See Shaking Food (page 17).
7.
The air fryer will beep 3 times when
finished. The display will show:
8.
Optionally, press
+ –
Press the or buttons to change the
time (1–60 minutes).
9. Take the baskets out of the air fryer,
being careful of hot steam.
10. Remove inner basket from the outer
basket to serve food.
When separating baskets:
a.
Make sure the baskets are resting
on a flat surface.
b.
Watch for hot oil or fat collected
in the outer basket. To avoid
splashing, drain oil before
replacing inner basket. [
11. Allow to cool before cleaning.
Keep Warm.
Figure 4.1 ]
Figure 4.1
EN
15