EN
Test Run
A test run will help you become familiar
with your air fryer, make sure it's working
correctly, and clean it of possible residues in
the process.
1.
Make sure the air fryer baskets are
empty and plug in the air fryer.
2.
Press Preheat. The display will show
"400°F" and
3.
Press
to begin preheating.
When preheating is done, the air fryer
will beep.
4.
Pull out the baskets and let them cool
for 5 minutes. Then place the empty
baskets back in the air fryer.
5.
Press
to select the Steak preset.
The display will show "400°F" and
MIN".
"6
6.
Press
Temp/Time
blink on the display. Press the
once to change the time to 5 minutes.
7.
Press
to begin. When finished,
the air fryer will beep.
8.
Pull out the baskets. This time, let the
baskets cool completely for 10–30
minutes.
12
MIN".
"5
twice. The time will
–
button
Basket Tips
Separate baskets only after cooking,
•
to serve food and wash baskets.
•
The button guard protects the release
button from being pressed accidentally.
Slide the button guard forward to press
the release button. [
Never press the release button while
•
carrying the baskets.
Only press the release button with the
•
baskets resting flat on a counter (or any
level, heat-resistant surface).
•
The handle is attached to the inner
basket, not the outer basket. [
When you press the release button,
the outer basket will drop.
Note:
Do not unscrew the basket handle from
•
the baskets.
•
To order accessories, please contact
Customer Support (see page 24).
Figure 2.3
Figure 2.3
]
Figure 2.2
]